Liquid Boiler Water Treatment Extra

Liquid Boiler Water Treatment Extra – generally used as a marine one-shot chemical treatment for Medium-Low Pressure Marine Boilers

pH, corrosion, scale and sludge controller for boiler water

Aquamarine Boiler Water Treatment is a combined concentrate liquid alkaline product that inhibits corrosion, controls alkalinity, controls hardness and oxygen. It is easy to use, non-hazardous and effective. It functions by neutralising acid conditions, precipitating salts, sludge conditioning and oxygen scavenging. For additional Oxygen Scavenger please see separate product details.

Boiler water additive for low/medium pressure boilers (up to 250 psi).

Aquamarine Boiler Water Treatment is fed into the water feed line by means of a continuous feed dosing pump.
Initial dose: 2.4 litres of Boiler Water Treatment/tonne in the boiler water system.


Please download a boiler water log sheet from the log sheet section on the CD or from our website Logs should be submitted monthly for analysis and a report will be sent out by the end of the month in which they are received.
Key parameters are PAlkalinity, Chloride and Sulphite
• Above 200 p.p.m. no dose is required but above 300 PAlkalinity p.p.m. blow down should be implemented
• Sulphite should be kept at 30-50 p.p.m or according to manufacturer’s guide-lines
• Chloride content should be controlled below a level of 200 p.p.m. (Above 200 – Blow-Down) Please ensure that all the test reagents are within the date on the bottle before using.

Feedwater Temperatures – Some typical issues
Temperature of the hotwell is too low. (The temperature should be kept between 70° – 80° C to reduce the oxygen content):
• Return condensate lines and make up line are fitted above the water level. (Tubes to be length under the water level to avoid oxygen intake) Hotwell covers open!
(steam cushion left)
• Temperature of hotwell is above the 90° C. ( Temperature must be kept maximum 90° C to avoid cavitation)
• Feed pump should be placed on the same level as the hotwell or one deck lower to avoid vapour formation in the pump Aquamarine BWT test kit is available for accurate system checking.

(see under Test Kits)

Pack Size 25 Ltr.

NSN J150 6850-99-834-9159 Product Ref. 0003

Boiler Water & Condensate Treatments

Boiler and Condensate Treatment Chemical Products 

Low, Medium & High Pressure Boilers, waste heat recovery systems, Condensate lines, chemical treatments, remote monitoring, manual and electronic dosing, log records, feedback, technical assistance.

Whether for domestic use or cargo boilers it is important to maintain them,  the cost of doing this is minimal but not an option.

Aquamarine will provide a dosing regime, programme and full support.

For help on selecting from our range of products for ongoing dosing, for cleaning or descaling please contact us.

See list of products,

For more info please contact us.